Heavy Duty
Vacuum Overclamp Kits
Series 22		 Download Product Data Sheet
PDF Format


Semco’s VOC Series 22 Heavy Duty Overclamps are used for testing high pin count bare or loaded printed circuit boards with open vias. The rugged design of the VOC Series 22 is designed to accept the higer pressures resulting from high probe counts while minimizing board flex.

The VOC Series 22 Heavy Duty Overclamps come with fixed delrin pressure fingers, hinge and latching assemblies, mounting instructions and hardware.

VOC Series 22 Heavy Duty Overclamps will accommodate fixtures with dress frames as well as newer style fixtures using full size top plates.

Generate a part number and request a quote.
Instructions:
Step 1: Step 2: Step 3: Step 4:
Select kit based on size. Select Rail & Insert Option,
and ESD.		 Select available Push Finger options. Submit the form to generate your part number.
ASM - SERIES SIZE - RAIL & INSERT OPTIONS ESD - N/A - PUSH FINGER OPTIONS
3 4 5 6 7 8 9 10 11 12 13 14
A S M 2 2 - / / / - /

Kit Sizes Available
3 4 Numbering Code Location
Kit Size Description Overclamp Size Fixture Size Max UUT No. Rails No. Fingers
0 8 HDOC-104S 20"x16" 24"x20" 17"x13" 8 48
1 0 HDOC-105S 24"x16" 30"x20" or
30"x18" HP		 21"x13" 12 72
1 2 HDOC-106S 24"x20" 30"x24" 21"x17" 12 72
        Rail - Insert & ESD Protection                                             Push Finger Options
5 6 7 Numbering Code Location 11 12 13 Push Finger Options
H Solid Rails - Horizontal F1     Rails - .100 UUT Stop
V Solid Rails - Vertical F2     Rails - .125 UUT Stop
G G-10 Insert   F3   Insert - .100 UUT Stop
G E G-10 Insert, ESD   F4   Insert - .125 UUT Stop
L Lexan Insert     FC Custom - Call for detail
L E Lexan Insert, ESD    
     
  *Note: Must choose desired Rail H or V and Push Finger Option F1 or F2.
If Insert plate is also desired must choose G or L and use Push Finger Options F3 or F4.
FC - Custom Push Finger sizes and UUT Stops available upon request.		  

Back to Top

CAM/TRAC® is a registered trademark of Semco Machine Corporation. No information, pictures, or text on
this site may be copied in whole or in part without express written consent from Semco Machine Corporation.

© 2007 SEMCO MACHINE CORPORATION
5 Kenneth Miner Drive, Wrentham, MA 02093 USA
Phone: 1.508.384.8303 || Fax: 1.508.384.2508