Untitled Document

Products >GR2270 Vacuum Test Fixtures > Series 63

Semco Series 63 Vacuum Test Fixtures can be utilized on both the GR2270 Tester and Semco's Series 3200 Receivers.
ASM-63

 

 

Click image to zoom

 

How To Determine UUT And Pan Measurements


Description
Fixture Size
Max UUT Size
GR-102S Vacuum Fixture
16x12
GR-103S Vacuum Fixture
20x16
 
All dimensions in inches 
   

 

 

 

 

How To Determine Dimensions


First Dimension: Left To Right
Second Dimension: Front To Back

Example: ASM-6306-E
20" Left To Right
16" Front To Back

Click image to zoom

 

 

 

Please
(Complete all menu selections to request a quote)

 

 

Kit Size

Choose a kit size based on the size of your printed circuit board to be tested.

Complete Kit Only

Semco Series 30 Fixtures are only offered as a Complete Kit. For an Upper Head Assembly as shown below, please see our Series 10 MT Mechanical Test Kits..

Stripper Plate

A Stripper Plate is a spring-loaded FR4 plate that helps support the unit under test (UUT). It also protects the probes from damage.

ESD Protection

The ESD option is recommended when there are static sensitive devices on the U.U.T.  It consists of a Static Dissipative laminate bonded to the FR4 probe and stripper plates.  The Polycarbonate lid is also ESD coated.

Pan Depth

The sheet metal pans provided on Semco kits are available in different depths, allowing components, cooling fans, or additional hardware to be installed inside the pan.

Gas Arm / Carlson Hinge Spring Supports

The Gas Arm lid option replaces the standard Carlson spring hinges.

Microswitch

When the Microswitch opton is installed in the fixture, it signals "Begin Test" when actuated by closing the top lid.

Riser Blocks

Riser Blocks raise the polycarbonate lid to accommodate tall components on the UUT (Unit Under Test).  Riser blocks are recommended when you have components taller than 1.2".

 

 

Untitled Document

Phone: 508-384-8303 | Fax: 508-384-2508 Home
Our Products
Our Services

Parts
About Us

Contact
CAM/TRAC ® and CAM/GATE ® are registered trademarks of Semco Machine Corporation. US Patent No. 5550481. All rights reserved. All content on this site is protected by copyright and any reproduction is prohibited.

Sunday, October 22, 2017
Copyright © 2017 Semco Machine Corporation. All Rights Reserved