Semco Series 47 CAM/TRAC Test Kits

Kit Size

Choose a kit size based on the size of your printed circuit board to be tested.

Complete Kit

Semco Series 47 Fixtures are only offered as a Complete Kit. For a Camtrac Upper Head Assembly as shown below, please see Series 40..

Stripper Plate

A Stripper Plate is a spring-loaded FR4 plate that helps support the unit under test (UUT). It also protects the probes from damage.

ESD Protection

The ESD option is recommended when there are static sensitive devices on the U.U.T. It consists of a Static Dissipative laminate bonded to the FR4 probe and stripper plates. The Polycarbonate lid is also ESD coated.

Pan Depth

The sheet metal pans provided on Semco kits are available in different depths, allowing components, cooling fans, or additional hardware to be installed inside the pan.

Push Plate Option

CAM/TRAC Push Plates are available in .500" thick Polycarbonate Lexan, or .375" thick G-10.

Microswitch

When the Microswitch opton is installed in the fixture, it signals "Begin Test" when actuated by closing the top lid.

Actuator And Push Plate Options

Single Arm Lever - PushPlate Travel Distance .500"
Single Arm Lever - PushPlate Travel Distance .750"
Draw Bar Option -PushPlate Travel Distance .500"

Riser Blocks

Riser Blocks raise the polycarbonate lid to accommodate tall components on the UUT (Unit Under Test). Riser blocks are recommended when you have components taller than 1.2".

Actuator Extender Handle

The CAM/TRAC Actuator Extender Handle extends the length of the Single Arm Lever Option by 4.5".

Kit Size	Max UUT Size	Max UUT Size with Stripper Plate
VP-CT102S: 16 X 12	13.00 X 8.00	13.00 X 8.00
VP-CT103S: 20X 16	17.00 X 12.50	17.00 X 11.75
VP-CT104S: 24 X 20	21.00 X 14.00	20.00 X 13.75
All dimensions in inches		** Other sizes available for this stripper plate; consult factory.

Content on this page requires a newer version of Adobe Flash Player.