Untitled Document

Products > CAM/GATE Test Kits > Series 457

Semco CT-VPG-12 Series 457: An affordable solution for testing of printed circuit boards
ASM-457

 

  • Z-Axis Motion via our patented CAM/TRAC Technology
  • Easy Access to UUT for debug and calibration
  • Latch assembly engages and releases when actuating the clamping assembly
  • Five piece sheet metal pan design facilitates modification of the pan for installation of connectors, fans and other components. Optional pan depths available
  • Tooling holes provided to help insure accurate drilling and alignment of plates
  • With the CamGate's 1/2" incrementally Adjustable Frame Assembly, the 1/2" and 1" riser block option is not needed for PCA's with tall Components." The 1/2" or 1" Riser Block option can be added in addition to the Adjustable Frame Assembly for PCA's with very tall components such as heat sinks, tall capacitors, or transformers.
  • Optional sheet metal pan depths available

 

 

Click image to zoom

How To Determine UUT And Pan Measurements


Kit Size
Max UUT Size
Max UUT Size with Stripper Plate
VP-CG102S: 16 X 12
9.62 X 7.50
9.62 X 6.75
VP-CG103S: 20 X 16
13.62 X 10.75
13.62 X 9.25
VP-CG104S-N: 24 X 20
17.62 X 10.75
17.62 X 9.85
All dimensions in inches 

 

 

 

 

How To Determine Kit Dimensions


First Dimension: Left To Right
Second Dimension: Front To Back
Example:
ASM-4506 CG103S 20" x 16"
20 " Left to Right
16 " Front to Back

        Click image to zoom

Untitled Document

Phone: 508-384-8303 | Fax: 508-384-2508 Home
Our Products
Our Services

Parts
About Us

Contact
CAM/TRAC ® and CAM/GATE ® are registered trademarks of Semco Machine Corporation. US Patent No. 5550481. All rights reserved. All content on this site is protected by copyright and any reproduction is prohibited.

Wednesday, December 13, 2017
Copyright © 2017 Semco Machine Corporation. All Rights Reserved

 

 

 

 

 

 

 

Please
(Complete all menu selections to request a quote)

 

 

Kit Size

Choose a kit size based on the size of your printed circuit board to be tested.

Upper Head Option

The Upper Head consists of the 1/2" thick clear polycarbonate lid, handle assembly, hinge assembly, and latch blocks.

Stripper Plate

A Stripper Plate is a spring-loaded FR4 plate that helps support the unit under test (UUT). It also protects the probes from damage.

ESD Protection

The ESD option is recommended when there are static sensitive devices on the U.U.T.  It consists of a Static Dissipative laminate bonded to the FR4 probe and stripper plates.  The Polycarbonate lid is also ESD coated.

Pan Depth

The sheet metal pans provided on Semco kits are available in different depths, allowing components, cooling fans, or additional hardware to be installed inside the pan.

Push Plate Option

CAM/TRAC Push Plates are available in .500" thick Polycarbonate Lexan, or .375" thick G-10.

Microswitch

When the Microswitch opton is installed in the fixture, it signals "Begin Test" when actuated by closing the top lid.

Riser Blocks

Riser Blocks raise the polycarbonate lid to accommodate tall components on the UUT (Unit Under Test).  Riser blocks are recommended when you have components taller than 1.2".