Untitled Document

Products > Mechanical Test Kits > Series 31

Untitled Document

Phone: 508-384-8303 | Fax: 508-384-2508 Home
Our Products
Our Services

Parts
About Us
Contact CAM/TRAC ® and CAM/GATE ® are registered trademarks of Semco Machine Corporation. US Patent No. 5550481. All rights reserved. All content on this site is protected by copyright and any reproduction is prohibited.

Thursday, May 16, 2024
Copyright © 2024 Semco Machine Corporation. All Rights Reserved

 

Semco Series 31 GR Dual Well Test Kits - An affordable solution for testing of printed circuit boards
ASM-31
  • Rear panel has the GR2270 style interface
  • Features a Hinging 3/8” thick FR4 Probe Plate
  • Rugged 1/2” thick clear Polycarbonate Lid  
  • Five piece sheet metal pan facilitates modification of the pan for installation of connectors, fans and other components
  • Tooling holes provided to help insure accurate drilling and alignment of plates
  • Optional sheet metal pan depths available
  • ESD option available
  • Uses the same upper head assemblies as our Series 10 Kits

    •  

    Click image to zoom

     

    How To Determine UUT And Pan Measurements

    Kit Size

    Max UUT Size Per Well
    Max UUT Size Per Well, with Stripper Plate
     
    GR102S-DW 16 X 12 (ASM-3104)
    5.00 X7.50
    5.00 X 7.00
    GR103S-DW 20X 16 (ASM-3106)
    7.00 X 10.00
    6.50 X 10.00
    GR104S-DW 24 X 20 (ASM-3108)
    9.00 X 14.00
    8.50 X 14.00
    		 
     
    All dimensions in inches 

     

     

     

     

    How To Determine Kit Dimensions

    First Dimension: Left To Right
    Second Dimension: Front To Back
    Example:
    ASM-3104 GR-102S-DW 16" x 12"
    16 " Left to Right
    12" Front to Back

    Click image to zoom

     

     

     

     

     

    Please
    (Complete all menu selections to request a quote)

     

    Kit Size

    Choose a kit size based on the size of your printed circuit board to be tested.

    1Complete Kit Only

    Semco Series 31 Fixtures are only offered as a Complete Kit. For an Upper Head Assembly as shown below, please see our Series 11 MT Mechanical Test Kits..

    12

     

    Microswitch

    When the Microswitch opton is installed in the fixture, it signals "Begin Test" when actuated by closing the top lid.

    Riser Blocks

    Riser Blocks raise the polycarbonate lid to accommodate tall components on the UUT (Unit Under Test).  Riser blocks are recommended when you have components taller than 1.2".

    ESD Protection

    The ESD option is recommended when there are static sensitive devices on the U.U.T.  It consists of a Static Dissipative laminate bonded to the FR4 probe and stripper plates.  The Polycarbonate lid is also ESD coated.