Semco Series 30 Dual Well Mechanical Test Kits

Kit Size

Choose a kit size based on the size of your printed circuit board to be tested.

Complete Kit Only

Semco Series 30 Fixtures are only offered as a Complete Kit. For an Upper Head Assembly as shown below, please see our Series 10 MT Mechanical Test Kits..

Stripper Plate

A Stripper Plate is a spring-loaded FR4 plate that helps support the unit under test (UUT). It also protects the probes from damage.

ESD Protection

The ESD option is recommended when there are static sensitive devices on the U.U.T. It consists of a Static Dissipative laminate bonded to the FR4 probe and stripper plates. The Polycarbonate lid is also ESD coated.

Pan Depth

The sheet metal pans provided on Semco kits are available in different depths, allowing components, cooling fans, or additional hardware to be installed inside the pan.

Gas Arm / Carlson Hinge Spring Supports

The Gas Arm lid option replaces the standard Carlson spring hinges.

Microswitch

When the Microswitch opton is installed in the fixture, it signals "Begin Test" when actuated by closing the top lid.

Riser Blocks

Riser Blocks raise the polycarbonate lid to accommodate tall components on the UUT (Unit Under Test). Riser blocks are recommended when you have components taller than 1.2".

Kit Size	Max UUT Size	Max UUT Size with Stripper Plate

GR-102S: 16 X 12	13.00 X 8.00	12.75 X 6.75
GR-103: 16 X 20	13.00 X 14.00	13.00 x 14.00
GR-103S: 20X 16	17.00 X 10.00	17.00 X 10.00 **
GR-104S: 24 X 20	21.00 X 14.00	20.75 X 13.75
GR-105S: 30 X 20"	27.00 X 14.00	26.75 X 14.00
All dimensions in inches		** Other sizes available for this stripper plate; consult factory.

Content on this page requires a newer version of Adobe Flash Player.