Untitled Document

Products > Mechanical Test Kits > Series 11

Semco Series 11 MT Dual Well Test Kits - An affordable solution for testing of printed circuit boards
ASM-11

 

  • Features a Hinging 3/8” thick FR4 Probe Plate
  • Rugged 1/2” thick clear Polycarbonate Lid  
  • Five piece sheet metal pan design facilitates modification of the pan for installation of connectors, fans and other components
  • Tooling holes provided to help insure accurate drilling and alignment of plates
  • Optional sheet metal pan depths available
  • ESD option available

 

Click image to zoom

 

How To Determine UUT And Pan Measurements


Kit Size

Max UUT Size Per Well

Max UUT Size Per Well, with Stripper Plate
 
MT102S-DW 16 X 12
5.00 X7.50
4.75 X 7.00
MT103S-DW 20X 16
7.00 X 10.00
6.50 X 10.00
MT104S-DW 24 X 20
9.00 X 14.00
8.50 X 14.00
 
 
All dimensions in inches 

 

 

 

 

How To Determine Kit Dimensions


First Dimension: Left To Right
Second Dimension: Front To Back
Example:
ASM-1104 MT-102S-DW 16" x 12"
16 " Left to Right
12" Front to Back

Click image to zoom

 

Untitled Document

Phone: 508-384-8303 | Fax: 508-384-2508 Home
Our Products
Our Services

Parts
About Us

Contact
CAM/TRAC ® and CAM/GATE ® are registered trademarks of Semco Machine Corporation. US Patent No. 5550481. All rights reserved. All content on this site is protected by copyright and any reproduction is prohibited.

Sunday, October 22, 2017
Copyright © 2017 Semco Machine Corporation. All Rights Reserved

Kit Size

Choose a kit size based on the size of your printed circuit board to be tested.

Upper Head Option

The Upper Head consists of the 1/2" thick clear polycarbonate lid, handle assembly, hinge assembly, and latch blocks.

Stripper Plate

A Stripper Plate is a spring-loaded FR4 plate that helps support the unit under test (UUT). It also protects the probes from damage.

ESD Protection

The ESD option is recommended when there are static sensitive devices on the U.U.T.  It consists of a Static Dissipative laminate bonded to the FR4 probe and stripper plates.  The Polycarbonate lid is also ESD coated.

Pan Depth

The sheet metal pans provided on Semco kits are available in different depths, allowing components, cooling fans, or additional hardware to be installed inside the pan.

Gas Arm / Carlson Hinge Spring Supports

The Gas Arm lid option replaces the standard Carlson spring hinges.

Microswitch

When the Microswitch opton is installed in the fixture, it signals "Begin Test" when actuated by closing the top lid.

Riser Blocks

Riser Blocks raise the polycarbonate lid to accommodate tall components on the UUT (Unit Under Test).  Riser blocks are recommended when you have components taller than 1.2".